Skip to main content
Products in the cart: 0. See details

Control Pro 120 Desk White / White LVNSystem

Price 1 099,00 zł
Availability:
low stock
Shipping time: 24 hours
Ask about the product
pcs

Opis

Control Pro series

Two motors, 100 kg load capacity, no compromises

Control Pro is a dual-motor electric standing desk with a 100 kg load capacity and a 72–120 cm range. The display controller remembers 3 heights and charges your phone, and the one-piece 120 × 67 cm desktop holds all your equipment.

  • 2 motors
  • 72–120 cm adjustment
  • 100 kg load capacity
  • 10 W USB charger

Key specifications at a glance

48 cmadjustment travel

72 to 120 cm frame height — match the desktop to your height, sitting or standing

approx. 19 sfrom bottom to top

two motors run at 25 mm/s, so changing position takes just a moment

100 kgload capacity

an ultrawide monitor, a tower PC and a lamp with no risk of overloading

100–170 cmframe width

extend the frame to fit the desktop and give your legs as much room as you need

Why the Control Pro electric desk

  • 2 motors in the columns – the desktop rises at 25 mm/s, bottom to top in about 19 s
  • 100 kg load capacity – headroom for two monitors, a desktop PC and accessories
  • 72–120 cm range – set the desktop at elbow height, sitting or standing
  • 3 memory presets and a timer – return to your height with one button, and the timer reminds you to change position
  • 10 W USB charger in the controller – charge your phone or power a desk lamp right from the desk
  • You set the leg spacing – 100–170 cm frame and a desktop with no pre-drilled holes
  • 36-month warranty – collision sensor and 7 cable clips included
Working with a laptop at a white Control Pro 120 desk

From chair to standing in about 19 seconds

Each column has its own motor, so the desktop rises evenly at 25 mm/s. Hold the arrow and the display shows the current height — you hit the same position every time.

  • Frame height range 72–120 cm
  • 18 mm desktop — work surface at approx. 74–122 cm
  • 2 motors, 25 mm/s speed
Control Pro in actionAdjusting from sitting to standing, saving and recalling memory presets, the timer, charging a phone from the USB port.
Setting the Control Pro desk height with a panel button

Your heights under one button

The controller has a display, three memory presets and a timer. Save your sitting and standing heights, then recall them by number. The timer (30 minutes – 2 hours) reminds you with a sound and an LED that it's time to change position.

  • 3 memory presets: buttons 1, 2, 3
  • Position change timer up to 2 hours
  • USB-A port 5 V / 2 A (10 W)
  • Panel lock and cm / inch units
Control Pro 120 desk – white frame, white desktop – front view

You set the leg spacing

The desktop has no pre-drilled holes, and the frame extends from 100 to 170 cm. During assembly you decide how wide to set the legs and make room for your knees, a drawer unit or a second chair.

  • Frame width 100–170 cm
  • 60 cm deep feet
  • Fits desktops from 110 × 60 to 200 × 80 cm
Control Pro 120 desk – white frame, white desktop – left view

One desktop, no joint in the middle

The desktop is a single 18 mm laminated board with 2 mm ABS edge banding. With no gap in the middle it's easy to wipe, and you can clamp a monitor arm anywhere along the edge.

  • 120 × 67 cm
  • 18 mm laminated board, ABS edge banding
  • Colors: white, black, Gold Craft Oak
Close-up of the column and frame of the white Control Pro frame

Stable when typing and at full height

The powder-coated steel and aluminum frame stands on 60 cm deep feet with leveling glides. Anti-vibration pads between the frame and the desktop dampen vibration, and the collision sensor stops the desktop at an obstacle.

  • Steel and aluminum, powder-coated
  • 12 anti-vibration pads included
  • Collision sensor with adjustable sensitivity

Assembly

How installation works

  • 2 people to turn the desk over (recommended in the manual)
  • Tools: only a set of Allen keys is included; you need your own power drill/driver to screw on the desktop (no pre-drilled holes)
  1. Assemble the crossbarsInsert the M6 × 12 bolts into the column, slide in the left and right crossbars and tighten them. Repeat with the second column.
  2. Screw on the bracketsScrew on the desktop brackets with M6 × 10 bolts and insert the anti-vibration pads.
  3. Screw on the feetScrew a foot onto each column with M6 × 16 bolts using the key included.
  4. Set the frame widthLay the desktop upside down on a blanket, slide the beams into the crossbars, adjust the frame width (100–170 cm) and lock it with the bolts.
  5. Screw on the desktopAttach the frame to the desktop with 12 ST4.2 × 16 screws.
  6. Connect the electronicsConnect the controller to the power supply and the columns (use the extension cable for the far one). Screw on the controller and, optionally, the power supply, and lay the cables in the clips.
  7. Turn over, level and resetTurn the desk over with two people and level it with the feet. Before first use, hold ▲ and ▼ together until “rSt” appears and you hear the second beep.
The desktop has no pre-drilled holes, so before screwing it on, position the frame the way you prefer — wider if a drawer unit or a second person will sit under the desk, narrower if you want the sides of the desktop free.

What's in the box

  • frame: 2 columns with motors, 2 feet, 2 desktop brackets, left and right crossbars, 2 sliding beams
  • display controller, power supply, power cord, extension cable for the second column
  • 120 × 67 cm desktop
  • M6 × 10 bolts (4 pcs), M6 × 12 (16 pcs), M6 × 16 (8 pcs), ST4.2 × 16 screws for the desktop (12 pcs) and for the power supply (5 pcs), ST3.9 × 38 for the controller (2 pcs), ST3.5 × 13 (2 pcs)
  • 12 anti-vibration pads, 7 cable clips, set of Allen keys

Safety: Do not exceed a load of 100 kg. Connect the power only after the whole desk is assembled. Turn the desk over with the help of a second person.

Assembling the Control Pro deskAssembling the frame, setting the frame width to fit the desktop, screwing on the desktop, connecting the controller and resetting.

Which model should you choose?

Control LiteControl Flex+Control Pro
Motors112
Height range72–118 cm72–118 cm72–120 cm
Load capacity70 kg70 kg100 kg
Speed20 mm/s20 mm/s25 mm/s
Frame width90–135 cm90–135 cm100–170 cm
Memory presets333
10 W USB charger——yes

Control Pro electric desk specifications

Adjustment
Height adjustmentelectric, 2 motors in the columns
Frame height range72–120 cm
Adjustment speed25 mm/s
Memory presets3
Controllerdisplay, T, M, ▲ ▼, 1 2 3 buttons
USB portUSB-A 5 V / 2 A (10 W)
Position change timerfrom 30 minutes to 2 hours, in 30-minute steps
Collision sensorgyroscopic, sensitivity adjustable on a 0–8 scale
Frame
Materialsteel and aluminum, powder-coated
Frame width100–170 cm (adjustable)
Foot depth60 cm
Glidesleveling
Load capacity100 kg
Recommended desktopfrom 110 × 60 to 200 × 80 cm
Frame weight19.8 kg net
Desktop
Dimensions120 × 67 cm
Thickness18 mm
Materiallaminated board, ABS edge banding
Constructionone piece, no pre-drilled holes
Desktop colorwhite
Frame colorwhite
Power and conditions
Power supply100–240 V, external power supply
Operating temperaturefrom -5 to +40 °C
General
Warranty36 months
Delivery conditionself-assembly
Certification marksCE
Manufacturer / importerEKO-LIGHT TEAM Sp. z o.o., Częstochowa

Questions about this product

Is the Control Pro desktop one piece?
Yes. The 120 × 67 cm Control Pro desktop is a single 18 mm laminated board with no joint in the middle.
What is the height adjustment range of the Control Pro?
You adjust the Control Pro frame electrically between 72 and 120 cm. With an 18 mm desktop, the work surface sits at about 74–122 cm.
Do you have to hold the memory button on the Control Pro while it moves?
No. According to the Control Pro controller manual, you recall a saved height by pressing its number: 1, 2 or 3. To save, press the “M” button and then the number you choose.
How much weight can the Control Pro hold and how much does it weigh?
The Control Pro has a load capacity of 100 kg when evenly distributed. The dual-motor frame itself weighs 19.8 kg net.
Will the Control Pro frame fit a 100 cm wide desktop?
It isn't designed for that. The Control Pro frame is 100–170 cm wide, and the recommended desktop size is from 110 × 60 to 200 × 80 cm — a narrower desktop won't cover the frame with enough margin.
How is the Control Pro different from the Control Flex+?
The Control Pro has 2 motors instead of 1, a 100 kg load capacity instead of 70 kg, 25 mm/s speed instead of 20 mm/s, a 72–120 cm range and a 100–170 cm frame. Plus a controller with a timer and a 10 W USB charger.
Does the Control Pro have anti-collision protection?
Yes. The Control Pro has a gyroscopic collision sensor that stops the desktop at an obstacle (code E05). You set the sensitivity in the controller menu on a 0–8 scale, separately for moving up and down.
How do I reset the Control Pro desk?
Hold ▲ and ▼ together until “rSt” appears on the screen, and keep holding until the second beep — the desktop will rise slightly and show the height. Reset before first use and when error E02 appears.

Bezpieczeństwo produktu

Manufacturer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Responsible person in the EU

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Importer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Rekomendowane dla Ciebie

    Najczęściej wybierane

    Sprawdzone rozwiązania, które realnie poprawiają komfort pracy