Skip to main content
Products in the cart: 0. See details

ML2 Monitor Arm LVNSystem

Price 129,00 zł
Availability:
high stock
Shipping time: 24 hours
Ask about the product
pcs

Opis

Monitor arms by LVN System

Laptop next to monitor, both above the desktop

The ML2 is a desk-mounted arm for a 17–32" monitor up to 9 kg and a 10–15.6" laptop up to 4 kg, with two arms on a shared pole. Set both screens side by side and keep room on the desktop for your keyboard.

  • 17–32" monitor
  • Laptop up to 4 kg
  • ±45° tilt
  • 10–85 mm clamp

Key specifications at a glance

9 kgmax. monitor weight

check your monitor's weight without its stand in its specifications; that is the load on the arm

4 kglaptop tray load capacity

the laptop sits securely, held by side holders and pads

10–15,6"laptop screen size

slide the side holders out to the width of your laptop

10–85 mmdesktop thickness for the clamp

the clamp has two positions: 10–45 mm and 45–85 mm; with a grommet the desktop can be 10–40 mm

Why the ML2 monitor and laptop arm

  • Monitor and laptop on one pole – two arms: one with a VESA head, the other with a tray
  • 17–32 inch monitor up to 9 kg – VESA 75 × 75 or 100 × 100 mount
  • Laptop tray for 10–15.6 inch laptops up to 4 kg – with side holders and non-slip pads
  • ±45° tilt and 360° rotation – set the monitor in landscape or portrait, and tilt the tray
  • 10–85 mm clamp or 10–40 mm grommet – mount on the edge or through a hole in the desktop
  • 5 cable clips – 4 on the arms and 1 on the pole
ML2 arm with a laptop and monitor on a desk

Laptop next to monitor, both at eye level

The ML2 has two arms on one pole: one holds a 17–32 inch monitor, the other a laptop tray. Both screens sit side by side above the desktop, leaving room on your desk for a keyboard and documents.

  • 17–32" monitor up to 9 kg
  • 10–15.6" laptop up to 4 kg
  • VESA 75 × 75 and 100 × 100
Installing the ML2 armClamp mounting, hanging the monitor, assembling the laptop tray and setting the height of both arms.
Laptop tray on the ML2 arm – adjustment

A tray your laptop won't slide off

Line the tray with the non-slip pads, slide the side holders out to the width of your laptop and flip out the bottom stops. Change the tray angle by loosening the screw in the head underneath.

  • Non-slip pads included
  • Sliding side holders
  • Adjustable tray tilt
ML2 monitor and laptop arm – angled view

Height of each arm set separately

Slide both arms onto the pole, one above the other, and lock each with the collar screw at the height you want using a 6 mm wrench. Tilt the monitor ±45°, swivel it ±90° and rotate it to portrait.

  • Tilt +45° / −45°
  • Arm swivel +90° / −90°
  • 360° screen rotation
Mounting the ML2 arm with a clamp on the desktop

On the edge or through a hole in the desktop

The clamp has two positions: for a 10–45 mm or 45–85 mm desktop. With a ø10–60 mm grommet hole you can mount the arm on a 10–40 mm desktop; without one, simply drill a ø10 mm hole.

  • Clamp: desktop 10–85 mm
  • Grommet: desktop 10–40 mm

Assembly

How installation works

  • 2 people to hang the monitor
  • Tools: Phillips screwdriver; 4 and 6 mm Allen keys are included; without a grommet hole, a drill and a ø10 mm drill bit
  1. Assemble the poleScrew the pole to the base with the M5 × 16 screw using a Phillips screwdriver.
  2. Attach to the desktopScrew on the clamp bracket in the position for a 10–45 mm or 45–85 mm desktop and tighten the knob from below. For grommet mounting, tighten the bolt from below with the washer.
  3. Fit the armsSet the VESA heads upright using the plate, slide both arms onto the pole, attach the clips and lock the height with a 6 mm wrench.
  4. Hang the monitorScrew the VESA plate to the monitor with the TOP arrow pointing up, slide the monitor into the head with two people and secure it with the M6 × 10 screw.
  5. Assemble the trayStick on the pads, insert the side holders, screw the VESA plate to the underside of the tray with M4 × 8 screws and slide the tray into the head of the second arm.
  6. Place your laptopSlide the holders out to the width of your laptop, flip out the bottom stops and run the cables through the clips.
If the monitor or tray drops, tighten the tilt axis screw with a 6 mm wrench. Check the stability of the arm at least once every 3 months.

What's in the box

  • pole with base
  • 2 arms and 2 VESA plates
  • laptop tray, 2 side holders and 2 non-slip pads
  • clamp with knob, angle bracket and washer for grommet mounting
  • 4 arm clips and 1 pole clip
  • screws: M5 × 16, M10 × 20, 4 × M6 × 10, 4 × M4 × 8
  • monitor screws: 4 × M4 × 12, 4 × M5 × 12, 4 washers
  • 4 mm and 6 mm Allen keys

Safety: Do not exceed 9 kg on the monitor arm and 4 kg on the tray. Do not rotate the arms beyond the range shown in the manual. Do not overtighten the screws.

Which arm should you choose?

M1M1 ProM2M2 ProML2
Screens supported1 monitor1 monitor2 monitors2 monitorsmonitor + laptop
Monitor size17–32"up to 34"17–32"up to 34"17–32"
Monitor weight (per arm)up to 9 kg2–9 kgup to 9 kg2–9 kgup to 9 kg, laptop up to 4 kg
VESA75 × 75 / 100 × 10075 × 75 / 100 × 10075 × 75 / 100 × 10075 × 75 / 100 × 10075 × 75 / 100 × 100
Height adjustment40 cm pole, screw lockspring, 16.5–41.5 cm40 cm pole, screw lockspring, 16.5–41.5 cm40 cm pole, screw lock
Screen tilt±45°±90°±45°±90°±45°
Desktop: clamp / grommet13–80 / 13–40 mm10–80 / 10–45 mm13–80 / 13–40 mm10–80 / 10–45 mm10–85 / 10–40 mm

ML2 monitor and laptop arm specifications

Monitor and laptop
Monitor17–32", up to 9 kg
VESA mount75 × 75, 100 × 100
Laptop10–15.6", up to 4 kg
Laptop traysliding side holders, 2 non-slip pads
Adjustment
Pole height40 cm
Height adjustmenteach arm set separately on the pole, locked with a screw
Monitor tilt+45° / −45°
Arm swivel+90° / −90°
Screen rotation360°
Tray tiltyes, axis screw in the head
Assembly
Clamp – desktop thickness10–45 mm or 45–85 mm (2 positions)
Grommet – desktop thickness10–40 mm (ø10–60 mm hole or ø10 mm drilled hole)
Cable management4 clips on the arms, 1 on the pole
Dimensions and weight
Dimensions (W × D × H)95.9 × 31.9 × 56.1 cm
Net / gross weight4.79 kg / 5.63 kg
Packaging43 × 30.3 × 12.3 cm
General
Colorblack
Materialsteel and plastic
Warranty36 months
Delivery conditionself-assembly, manual and wrenches included
Manufacturer / importerEKO-LIGHT TEAM Sp. z o.o., Częstochowa

Questions about this product

Which laptop fits on the ML2 tray?
The ML2 tray is designed for 10–15.6 inch laptops weighing up to 4 kg (manufacturer data from the packaging). Slide the side holders out to the width of your laptop.
Can I change the height of the laptop tray on the ML2 arm?
Yes. You slide the ML2 tray arm along the pole independently of the monitor arm and lock it with the collar screw using a 6 mm wrench. Change the tray angle with the axis screw in the head underneath.
Does the ML2 arm offer smooth adjustment?
No. The ML2 has no spring: you change the arm height after loosening the collar screw with a 6 mm wrench. You set the tilt, swivel and rotation of the monitor by hand.
Can I mount two 27-inch monitors on the ML2 arm?
No. The ML2 holds one monitor and a laptop. For two 27-inch monitors, choose the M2 (up to 32", 9 kg per arm) or the M2 Pro (up to 34", 2–9 kg per arm).
What desktop thickness does the ML2 arm fit?
The ML2 clamp has two positions: for a 10–45 mm or 45–85 mm desktop. With a ø10–60 mm grommet hole you can mount the arm on a 10–40 mm desktop.
What are the dimensions of the ML2 arm?
The ML2 arm measures 95.9 × 31.9 × 56.1 cm (W × D × H) and is black. It takes a monitor up to 32 inches and a laptop up to 15.6 inches.

Bezpieczeństwo produktu

Manufacturer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Responsible person in the EU

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Importer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Rekomendowane dla Ciebie

    Najczęściej wybierane

    Sprawdzone rozwiązania, które realnie poprawiają komfort pracy