Skip to main content
Products in the cart: 0. See details

M2 Pro Monitor Arm LVNSystem

Price 149,00 zł
Availability:
high stock
Shipping time: 24 hours
Ask about the product
pcs

Opis

Monitor arms by LVN System

Two screens, each on its own arm

The M2 Pro is a desk-mounted dual monitor arm for screens up to 34" weighing 2–9 kg each, with two independent spring-loaded arms. You raise, tilt and pull each screen toward you by hand, independently of the other.

  • 2 × up to 34"
  • 2–9 kg per arm
  • Spring-loaded arms
  • 10–80 mm clamp

Key specifications at a glance

34"max. size of each monitor

fits two wide screens or monitors of different sizes

2–9 kgper arm

within this range the spring balances the monitor; you adjust each arm separately

165–415 mmhead height above the desktop

set the screen low when sitting or higher, without loosening any screws

225–290 mmupper arm reach

pull the monitor closer or push it back toward the wall

Why the M2 Pro dual monitor arm

  • Two monitors up to 34 inches – each 2–9 kg, VESA 75 × 75 or 100 × 100 mount
  • Two independent spring-loaded arms – set the tension separately for each monitor
  • Heads 165–415 mm above the desktop – change the height of each screen by hand
  • ±90° tilt and pivot – set the screen in landscape or portrait
  • 10–80 mm clamp or 10–45 mm grommet – on the edge or through 2 ø10 mm holes
  • Cables in arm channels – cables hidden under covers
M2 Pro monitor arm in a home office

Each monitor on its own arm

The M2 Pro has two independent arms on a shared base. Each arm is spring-loaded, so you raise, lower and pull the monitor toward you by hand, and it stays in its new position.

  • 2 monitors up to 34"
  • 2–9 kg per arm
  • Spring tension adjusted separately
Installing and adjusting the M2 Pro armClamp mounting, hanging two monitors, adjusting the spring tension of each arm and hiding the cables.
M2 Pro arm dimensions and adjustment

Check the dimensions before you buy

The VESA head works 165–415 mm above the desktop, and the upper arm has a reach of 225–290 mm. The base with clamp is 94 mm high. The joints rotate ±180°, and the head tilts the screen ±90°.

  • Head 165–415 mm above the desktop
  • Upper arm reach 225–290 mm
  • VESA plate 117 × 117 mm
M2 Pro arm with two wide monitors

Monitors side by side, ultrawide too

The arm takes two monitors up to 34 inches, even of different weights, since you adjust each arm separately. Rotate the screen to portrait (pivot) and set the tilt within ±90°.

  • Pivot: portrait or landscape screen
  • Tilt +90° / −90°
  • Monitors of different weights (2–9 kg)
Cable channel in the M2 Pro arm

Cables hidden, desktop clear

Run the cables through the channels under the arms and cover them. Mount the arm with a clamp on a 10–80 mm desktop or through a 10–45 mm desktop using 2 ø10 mm holes spaced 51 mm apart.

  • Clamp: desktop 10–80 mm
  • Grommet: desktop 10–45 mm, 2 ø10 mm holes

Assembly

How installation works

  • 2 people to hang the monitors
  • Tools: 4 and 5 mm Allen keys are included; for grommet mounting without holes, a drill and a ø10 mm drill bit
  1. Prepare the clampScrew the bracket to the base plate in the position for a 10–50 mm or 45–80 mm desktop, fit the upper part of the base and screw on the clamp.
  2. Attach to the desktopTighten the knob under the desktop. For grommet mounting, drill 2 ø10 mm holes spaced 51 mm apart and tighten both bolts from below through the plate.
  3. Assemble the armsSlide the lower arms onto the base posts and lock them with a 4 mm Allen key, then slide on the upper arms.
  4. Fit the VESA headsInsert the heads into the upper arms and fix them with M8 × 30 screws using a 5 mm Allen key.
  5. Hang the monitorsScrew the 2 upper screws into the monitor, leaving a gap of about 3 mm, hang it on the head with two people and tighten all 4 screws. Repeat for the second monitor.
  6. Adjust the springsWith the arm horizontal, turn the spring screw with a 5 mm Allen key: clockwise if the monitor drops, counterclockwise if it rises.
  7. Hide the cablesRoute the cables through the arm channels and slide the covers along the arms. Do not pry them off from the side.
Monitors of different weights? Set the spring tension separately for each arm, always with the arm horizontal.

What's in the box

  • 2 lower arms and 2 spring-loaded upper arms
  • base with two posts and 2 VESA heads
  • clamp bracket, clamp with knob, plate and extra knob bolt for grommet mounting
  • screws: 2 × M6 × 8, 2 × M6 × 10, 2 × M8 × 30
  • 2 sets of monitor screws (4 × M4 × 12, 4 × M5 × 12, 4 washers)
  • 4 mm and 5 mm Allen keys

Safety: Each monitor must weigh 2–9 kg. Outside this range the spring will not balance the arm. Do not rotate the arms beyond the range shown in the manual. Do not overtighten the screws.

Which arm should you choose?

M1M1 ProM2M2 ProML2
Screens supported1 monitor1 monitor2 monitors2 monitorsmonitor + laptop
Monitor size17–32"up to 34"17–32"up to 34"17–32"
Monitor weight (per arm)up to 9 kg2–9 kgup to 9 kg2–9 kgup to 9 kg, laptop up to 4 kg
VESA75 × 75 / 100 × 10075 × 75 / 100 × 10075 × 75 / 100 × 10075 × 75 / 100 × 10075 × 75 / 100 × 100
Height adjustment40 cm pole, screw lockspring, 16.5–41.5 cm40 cm pole, screw lockspring, 16.5–41.5 cm40 cm pole, screw lock
Screen tilt±45°±90°±45°±90°±45°
Desktop: clamp / grommet13–80 / 13–40 mm10–80 / 10–45 mm13–80 / 13–40 mm10–80 / 10–45 mm10–85 / 10–40 mm

M2 Pro dual monitor arm specifications

Monitors
Number of monitors2
Max. screen size34"
Monitor weight2–9 kg per arm
VESA mount75 × 75, 100 × 100 (117 × 117 mm plate)
Adjustment
Arm type2 independent spring-loaded arms with adjustable tension
VESA head height above the desktop165–415 mm
Upper arm reach225–290 mm
Tilt+90° / −90°
Rotation in joints and head±180°
Screen rotationpivot (portrait / landscape)
Assembly
Clamp – desktop thickness10–80 mm (bracket positions 10–50 and 45–80 mm)
Grommet – desktop thickness10–45 mm, 2 ø10 mm holes spaced 51 mm apart
Base height with clamp94 mm
Cable managementchannels under the arms with covers
Weight and packaging
Net / gross weight3.6 kg / 4.27 kg
Packaging41.5 × 19.5 × 12.4 cm
General
Colorblack
Materialsteel and plastic
Warranty36 months
Delivery conditionself-assembly, manual and wrenches included
Manufacturer / importerEKO-LIGHT TEAM Sp. z o.o., Częstochowa

Questions about this product

Can I mount a 34-inch and a 24-inch monitor on the M2 Pro arm?
Yes, as long as each monitor weighs 2–9 kg and has a VESA 75 × 75 or 100 × 100 mount. The M2 Pro supports screens up to 34 inches, and you set the spring tension separately for each arm.
What are the dimensions of the M2 Pro arm?
The VESA head of the M2 Pro works at a height of 165–415 mm above the desktop, the upper arm has a reach of 225–290 mm, and the base with clamp is 94 mm high. The arm weighs 3.6 kg net.
What desktop thickness does the M2 Pro arm fit?
The M2 Pro clamp fits desktops 10–80 mm thick. Grommet mounting is possible on a 10–45 mm desktop and requires 2 ø10 mm holes spaced 51 mm apart.
Does the M2 Pro arm offer smooth adjustment?
Yes. Both M2 Pro arms are spring-loaded with adjustable tension, so once set, you move the monitors by hand without loosening any screws.
Can I hang monitors of different weights on the M2 Pro?
Yes, as long as each one is within the 2–9 kg range. You adjust the spring tension separately for each M2 Pro arm with the 5 mm Allen key included.
Can I rotate a monitor on the M2 Pro arm to portrait?
Yes. The M2 Pro heads have a pivot function and ±90° tilt, so you can set each screen in landscape or portrait.

Bezpieczeństwo produktu

Manufacturer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Responsible person in the EU

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Importer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Rekomendowane dla Ciebie

    Najczęściej wybierane

    Sprawdzone rozwiązania, które realnie poprawiają komfort pracy