Skip to main content
Products in the cart: 0. See details

Control Flex+ Frame Black LVNSystem

Price 549,00 zł
Availability:
available to order
Shipping time: 30 days
Ask about the product
pcs

Opis

Control Flex+ series

A frame you can fit to your desktop

Control Flex+ is a single-motor electric desk frame with a controller with a display and 3 memory presets. You extend it to 90–135 cm, screw it to the desktop and change the height within 72–118 cm.

  • 72–118 cm adjustment
  • Frame 90–135 cm
  • 3 height memory presets
  • 70 kg load capacity

Key specifications at a glance

46 cmadjustment travel

72 to 118 cm frame height — set the desktop at elbow height, sitting or standing

approx. 23 sfrom bottom to top

at 20 mm/s, changing position does not interrupt your work

70 kgload capacity

headroom for a desktop, monitor, computer, lamp and accessories

90–135 cmframe width

extend the telescopic crossbar to fit your desktop and the legroom you need

Why the Control Flex+ Electric Frame

  • Work sitting and standing – change the frame height from 72 to 118 cm with one button
  • 3 height memory presets – recall a saved position with one press of its number
  • Fits your desktop – from 100 × 60 to 160 × 80 cm, the frame extends to 90–135 cm
  • You set the leg spacing – the frame screws to a desktop without pre-drilled holes, wherever you want
  • Load capacity 70 kg – desktop, monitor on an arm, laptop and lamp with no worry about overloading
  • Collision sensor with adjustable sensitivity – the frame stops when the desktop hits an obstacle
  • Everything for assembly in the box – screws, Allen keys, anti-vibration pads and cable clips
Control Flex+ black frame in a 90 cm desk – setup

Sitting in the morning, standing in the afternoon

A single motor in the column raises the desktop smoothly at 20 mm/s. You hold the arrow, and the display shows the current height. With an 18 mm desktop, the work surface sits at approx. 74–120 cm.

  • Frame height range 72–118 cm
  • Adjustment speed 20 mm/s
  • The full range in approx. 23 s
Control Flex+ in actionAdjusting from sitting to standing, saving and recalling presets, collision sensor in operation.
Control Flex+ black frame – view from below

Your heights under one button

The controller has a display and three memory buttons. Press "S", then 1, 2 or 3 — and the height is saved. Later you return to it with one press of the number. In the settings you can change the units, screen brightness and collision sensor sensitivity.

  • 3 memory presets: buttons 1, 2, 3
  • Current height display
  • Metric or imperial units
Control Flex+ black frame – extended – front view

You set the leg spacing

The crossbar is telescopic: the frame extends from 90 to 135 cm. You screw the frame to a desktop without pre-drilled holes, so you decide how wide to space the legs and how much room to leave for your knees or a drawer unit.

  • Adjustable frame 90–135 cm
  • 60 cm deep feet
  • 10 M5 × 15 desktop screws included
Control Flex+ black frame – extended – left view

Fits the desktop you choose

The manufacturer designed the frame for desktops from 100 × 60 to 160 × 80 cm. Set the frame so the desktop is at least as wide as the frame. In LVN System desks, Control Flex+ works with 120 × 67 and 138 × 67 cm desktops.

  • Desktop width 100–160 cm
  • Desktop depth 60–80 cm
  • You choose the desktop separately — it is not included
Control Flex+ black frame – left view

Stable while typing and at full height

The powder-coated steel and aluminum frame stands on 60 cm deep feet. Anti-vibration pads between the frame and the desktop dampen vibrations, and the 70 kg load capacity leaves headroom for your equipment.

  • Steel and aluminum, powder-coated
  • 10 anti-vibration pads included
  • Colors: white or black

Assembly

How installation works

  • Tools: only a set of Allen keys is included; you need your own power drill/driver to screw on the desktop (no pre-drilled holes)
  1. Assemble the frameScrew the crossbar ends and the desktop arms to the top of both columns with M6 × 11 screws.
  2. Screw on the feetScrew the feet to the bottom of the columns with M6 × 35 screws using a 5 mm Allen key.
  3. Set the leg spacingSlide the telescopic crossbar between the columns, extend it to the chosen width (90–135 cm) and tighten.
  4. Connect the driveSlide the drive shaft into the holes in both columns and tighten the clamping screw with a 2 mm Allen key.
  5. Screw on the desktopLay the desktop face down, apply the anti-vibration pads, place the inverted frame on it and screw it on with M5 × 15 screws.
  6. Connect and resetScrew on the controller, connect the motor, controller and power supply cables, and run them through the clips. Before first use, hold the down arrow until “RES” appears.
The desktop needs no pre-drilled holes, so before screwing it on, position the frame as suits you — wider when a drawer unit goes under the desk or two people sit there, narrower for a smaller desktop.

What's in the box

  • 2 columns (one with a motor), telescopic crossbar with 2 end pieces, 2 desktop supports, 2 feet, drive shaft
  • controller with display and power supply
  • screws M6 × 11 (12 pcs), M6 × 35 (8 pcs), M5 × 15 desktop screws (10 pcs), M3.5 × 19 for the controller (2 pcs)
  • 5 mm and 2 mm Allen keys, 10 anti-vibration pads, 5 cable clips
  • desktop not included

Safety: Do not exceed a load of 70 kg and do not sit on the desktop. Plug in the power only after assembly is complete. Use only in dry rooms.

Assembling the Control Flex+ frameAssembling the frame, setting the leg spacing, screwing it to the desktop and connecting the controller.

Which frame should you choose?

Control LiteControl Flex+Control Pro
Motors112
Height range72–118 cm72–118 cm72–120 cm
Load capacity70 kg70 kg100 kg
Speed20 mm/s20 mm/s25 mm/s
Frame width90–135 cm90–135 cm100–170 cm
Foot depth58 cm60 cm60 cm
Recommended desktop—100–160 × 60–80 cm110–200 × 60–80 cm
Memory presets333
Collision sensor—yes, adjustable sensitivityyes, gyroscopic, sensitivity 0–8
Position change timer——yes
USB port in the controller——USB-A 10 W
Frame weight12 kg14.8 kg19.8 kg

Specifications: Control Flex+ Electric Frame

Adjustment
Height adjustmentelectric, 1 motor
Frame height range72–118 cm
Adjustment speed20 mm/s
Memory presets3, recalled with one press
Controllerdisplay, ▲ ▼ S 1 2 3 buttons
Collision sensoryes, adjustable sensitivity / off
Frame and desktop
Frame width90–135 cm (telescopic crossbar)
Frame depth (feet)60 cm
Recommended desktopfrom 100 × 60 to 160 × 80 cm
Desktop mounting10 M5 × 15 mm screws, no pre-drilled holes needed in the desktop
Desktop includedno
Construction
Materialsteel and aluminum, powder-coated
Load capacity70 kg (evenly distributed load)
Frame weight14.8 kg net, 16 kg with packaging
Packaging1 box 83.7 × 33.2 × 12.5 cm
Colorblack
Power and conditions
Power supply100–240 V, external power supply
Operating temperaturefrom -5 to +40 °C
General
Warranty36 months
Delivery conditionself-assembly, manual and wrenches included
MarkingsCE
Manufacturer / importerEKO-LIGHT TEAM Sp. z o.o., Częstochowa

Questions about this product

Is the Control Flex+ frame height-adjustable?
Yes. You change the height of the Control Flex+ frame electrically within 72–118 cm at 20 mm/s. You set the frame width (90–135 cm) manually with the telescopic crossbar during assembly.
What desktop fits the Control Flex+ frame?
The Control Flex+ frame is designed for desktops 100–160 cm wide and 60–80 cm deep. The desktop should be at least as wide as the frame setting (90–135 cm).
Does the Control Flex+ frame come with a desktop?
No. The Control Flex+ box contains the frame with the controller and power supply, screws, Allen keys, 10 anti-vibration pads and 5 cable clips. You choose the desktop separately, e.g. the Desktop board 120 × 67, 138 × 67 or 160 × 80 cm.
How do I attach a desktop to the Control Flex+ frame?
Lay the desktop upside down, place the anti-vibration pads over the holes in the supports, position the inverted frame and screw it on with the 10 M5 × 15 screws included. The desktop needs no pre-drilled holes — you choose the leg spacing yourself.
How long are the feet of the Control Flex+ frame?
The Control Flex+ feet are 60 cm long — that is the depth of the frame. In width, the frame extends to 90–135 cm.
What is the difference between the Control Flex+ and Control Flex frames?
The frame and drive are the same (72–118 cm, 90–135 cm, 70 kg, 20 mm/s). Control Flex+ has a controller with a display, 3 memory presets and settings for units, brightness and anti-collision sensitivity, while Control Flex has a two-button controller with no display or memory.
Does the Control Flex+ have collision protection?
Yes. The Control Flex+ anti-collision sensor stops the desktop when it hits an obstacle (code E02). You can change the sensitivity in the controller settings (option "CF") or turn detection off.
How do I reset the Control Flex+ frame?
Hold the down arrow until “RES” appears on the screen, and keep holding until the desktop lowers to its minimum height and rises slightly. Reset before first use and when error E60 appears.

Bezpieczeństwo produktu

Manufacturer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Responsible person in the EU

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Importer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Rekomendowane dla Ciebie

    Najczęściej wybierane

    Sprawdzone rozwiązania, które realnie poprawiają komfort pracy