Skip to main content
Products in the cart: 0. See details

M1 Monitor Arm LVNSystem

Price 59,00 zł
Availability:
high stock
Shipping time: 24 hours
Ask about the product
pcs

Opis

Monitor arms by LVN System

Screen at eye level, desktop clear

The M1 is a desk-mounted single monitor arm for 17–32" screens up to 9 kg, with an arm on a 40 cm pole. You set the height, tilt and rotation of the screen, and the monitor stand disappears from your desk.

  • 17–32" up to 9 kg
  • 40 cm pole
  • ±45° tilt
  • 13–80 mm clamp

Key specifications at a glance

40 cmpole height

slide the arm along the pole and lock it at a comfortable height for viewing the screen

9 kgmax. monitor weight

check your monitor's weight without its stand in its specifications; that is the load on the arm

±45°screen tilt

tilt the screen toward you or away from you, depending on the height you set it at

13–80 mmdesktop thickness for the clamp

the clamp fits thin and thick desktops; with a grommet mount the desktop can be 13–40 mm

Why the M1 monitor arm

  • 17–32 inch monitor up to 9 kg – fits screens with a VESA 75 × 75 or 100 × 100 mount
  • Set the height on a 40 cm pole – slide the arm up or down and lock it with a screw
  • ±45° tilt, ±90° swivel, 360° rotation – set the screen in landscape or portrait
  • Clamp or grommet – on the edge of a 13–80 mm desktop or through a hole in a 13–40 mm desktop
  • Cables in clips – route the monitor cable along the arm and pole
  • 36-month warranty – Allen keys and VESA screws are included
M1 arm with a monitor against a brick wall

Screen higher, desk clear

The monitor hangs on an arm that you slide along a 40 cm pole and lock with a screw at the height you want. The monitor stand disappears from the desktop, so you gain room for your keyboard, documents and coffee mug.

  • 40 cm pole
  • Monitors 17–32" up to 9 kg
  • VESA 75 × 75 and 100 × 100
Installing and adjusting the M1 armClamp mounting, hanging the monitor on the VESA plate, setting the height on the pole and the tilt, routing the cable through clips.
M1 arm – rotating the monitor to portrait

Landscape for movies, portrait for code

Tilt the VESA head within ±45°, swivel the arm 90° left and right, and rotate the screen 360°. Set the monitor in landscape for spreadsheets and movies, or in portrait for code and long documents.

  • Tilt +45° / −45°
  • Arm swivel +90° / −90°
  • 360° screen rotation (pivot)
Mounting the M1 arm with a clamp on the desktop

On the edge or through a hole in the desktop

Mount the M1 arm with a clamp on the edge of a 13–80 mm desktop or with a bolt through a grommet hole in a 13–40 mm desktop (ø10–60 mm hole). If the desktop has no grommet hole, simply drill a ø10 mm hole.

  • Clamp: desktop 13–80 mm
  • Grommet: desktop 13–40 mm, ø10–60 mm hole
  • Parts for both mounting methods included
M1 arm kit – mounting parts

No cable hanging behind the desk

Run the monitor cable through the clip on the arm and the clip on the pole, so it does not hang loose behind the desktop. The pole clip also holds the included Allen keys for when you want to readjust the setup.

  • Arm clip and pole clip
  • 4 and 6 mm wrenches included

Assembly

How installation works

  • 2 people to hang the monitor
  • Tools: Phillips screwdriver; 4 and 6 mm Allen keys are included; without a grommet hole, a drill and a ø10 mm drill bit
  1. Assemble the poleScrew the pole to the base with the M5 × 16 screw using a Phillips screwdriver.
  2. Attach to the desktopScrew the clamp bracket to the base and tighten the knob under the desktop. For grommet mounting, pass the bolt through the hole and tighten it from below with the washer.
  3. Fit the armAttach the clip to the arm, slide the arm onto the pole, set the height and lock the collar screw with a 6 mm wrench.
  4. Screw on the VESA platePlace the plate on the monitor with the TOP arrow pointing up and fix it with M4 or M5 screws and washers.
  5. Hang the monitorWith two people, slide the monitor with its plate into the arm head from above and secure it with the M6 × 10 screw using a 4 mm wrench.
  6. Route the cable and set the screenRun the cable through the clips on the arm and pole, then set the tilt, swivel and rotation of the screen by hand.
If the monitor drops when tilted, tighten the axis screw in the VESA head with a 6 mm wrench. Check at least once every 3 months that the arm is stable.

What's in the box

  • 40 cm pole with base
  • arm with VESA head and VESA plate
  • clamp with knob, angle bracket and washer for grommet mounting
  • arm cable clip and pole clip
  • mounting screws: M5 × 16, M10 × 20, 3 × M6 × 10
  • monitor screws: 4 × M4 × 12, 4 × M5 × 12, 4 washers
  • 4 mm and 6 mm Allen keys

Safety: Do not exceed a monitor weight of 9 kg. Use screws of the correct length and do not overtighten them. Do not rotate the arm beyond the range shown in the manual.

Which arm should you choose?

M1M1 ProM2M2 ProML2
Screens supported1 monitor1 monitor2 monitors2 monitorsmonitor + laptop
Monitor size17–32"up to 34"17–32"up to 34"17–32"
Monitor weight (per arm)up to 9 kg2–9 kgup to 9 kg2–9 kgup to 9 kg, laptop up to 4 kg
VESA75 × 75 / 100 × 10075 × 75 / 100 × 10075 × 75 / 100 × 10075 × 75 / 100 × 10075 × 75 / 100 × 100
Height adjustment40 cm pole, screw lockspring, 16.5–41.5 cm40 cm pole, screw lockspring, 16.5–41.5 cm40 cm pole, screw lock
Screen tilt±45°±90°±45°±90°±45°
Desktop: clamp / grommet13–80 / 13–40 mm10–80 / 10–45 mm13–80 / 13–40 mm10–80 / 10–45 mm10–85 / 10–40 mm

M1 monitor arm specifications

Monitor
Number of monitors1
Screen size17–32"
Max. monitor weight9 kg
VESA mount75 × 75, 100 × 100
Adjustment
Pole height40 cm
Height adjustmentarm slides along the pole, locked with a screw
Tilt+45° / −45°
Arm swivel+90° / −90°
Screen rotation (pivot)360°
Assembly
Clamp – desktop thickness13–80 mm
Grommet – desktop thickness13–40 mm (ø10–60 mm hole or ø10 mm drilled hole)
Cable managementclip on the arm and clip on the pole
Dimensions and weight
Dimensions (W × D × H)11.6 × 30.8 × 56.1 cm
Net weight2.4 kg
Packaging42.5 × 13 × 10 cm
General
Colorblack
Materialsteel and plastic
Warranty36 months
Delivery conditionself-assembly, manual and wrenches included
Manufacturer / importerEKO-LIGHT TEAM Sp. z o.o., Częstochowa

Questions about this product

How tall is the pole of the M1 arm?
The M1 pole is 40 cm tall. You slide the arm with the monitor along the pole and lock it at the height you want with the collar screw using a 6 mm wrench. The whole arm is 56.1 cm tall.
What desktop thickness does the M1 arm fit?
The M1 clamp mounts on desktops 13–80 mm thick. With a grommet hole (ø10–60 mm) you can mount the arm on a 13–40 mm desktop; without one, simply drill a ø10 mm hole.
What monitor can the M1 arm hold?
The M1 arm holds one 17–32 inch monitor weighing up to 9 kg with a VESA 75 × 75 or 100 × 100 mount. For a 34-inch monitor, choose the M1 Pro (up to 34", 2–9 kg).
Does the M1 arm offer smooth height adjustment?
No. The M1 arm has no spring: you change the height after loosening the collar screw on the pole with a 6 mm wrench. You set the tilt, swivel and rotation of the screen by hand. The M1 Pro has a spring-loaded arm.
Can I rotate a monitor on the M1 arm to portrait?
Yes. The VESA head of the M1 arm rotates the screen 360°, so you can set it in landscape or portrait. The tilt is ±45° and the arm swivel is ±90°.
What are the dimensions of the M1 arm?
The M1 arm measures 11.6 × 30.8 × 56.1 cm (W × D × H) and weighs 2.4 kg net. The pole is 40 cm tall.

Bezpieczeństwo produktu

Manufacturer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Responsible person in the EU

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Importer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Rekomendowane dla Ciebie

    Najczęściej wybierane

    Sprawdzone rozwiązania, które realnie poprawiają komfort pracy