Skip to main content
Products in the cart: 0. See details

Control Flex+ 140 Desk Black / White LVN System

Price 749,00 zł
Availability:
available to order
Shipping time: 30 days
Ask about the product
pcs

Opis

Control Flex+ series

A desk you can fit to yourself

Control Flex+ is a single-motor electric standing desk with a display controller, 3 memory presets and a one-piece 138 × 67 cm desktop. You change position in a dozen or so seconds, whenever your body needs it.

  • 72–118 cm adjustment
  • 3 height memory presets
  • 70 kg load capacity
  • One-piece desktop

Key specifications at a glance

46 cmadjustment travel

frame height from 72 to 118 cm: set the desktop at elbow height whether you sit or stand

approx. 23 sfrom bottom to top

at 20 mm/s, changing position does not interrupt your work

70 kgload capacity

enough for two monitors on an arm, a computer, a lamp and accessories

90–135 cmframe width

extend the telescopic crossbar to fit your desktop and the legroom you need

Why the Control Flex+ electric desk

  • Work sitting and standing – change the frame height from 72 to 118 cm with one button
  • 3 height memory presets – save your settings and return to them with one touch
  • One-piece 18 mm desktop – 138 × 67 cm, no joint in the middle
  • 70 kg load capacity – two monitors on an arm, a laptop and a lamp without worrying about overload
  • You set the leg spacing – 90–135 cm frame and a desktop with no pre-drilled holes
  • Collision sensor with adjustable sensitivity – the desktop stops when it hits an obstacle
  • 36-month warranty – and a cable organizer included
Control Flex+ 140 desk – black frame, white desktop, in a room setting – sitting position

Sitting in the morning, standing in the afternoon

A single motor in the column raises the desktop smoothly at 20 mm/s. You hold the arrow, and the display shows the current height, so you hit the same position every time.

  • Frame height range 72–118 cm
  • 18 mm desktop: work surface at approx. 74–120 cm
  • Adjustment speed 20 mm/s
Control Flex+ in actionAdjusting from sitting to standing, saving and recalling presets, collision sensor in operation.
Control Flex+ 140 desk – black frame, white desktop – right view

Your heights under one button

The controller has a display and three memory buttons. Save your sitting and standing heights, then recall them with one press. In the settings you can change units, screen brightness and collision sensor sensitivity.

  • 3 memory presets: buttons 1, 2, 3
  • Current height display
  • Anti-collision sensor with adjustable sensitivity or off
Control Flex+ 140 desk – black frame, white desktop – front view

You set the leg spacing

The desktop has no pre-drilled holes, and the frame crossbar is telescopic (90–135 cm). During assembly you decide how wide to set the legs and make room for your knees, a drawer unit or a second chair.

  • Adjustable frame 90–135 cm
  • 60 cm deep feet
  • Fits desktops from 100 × 60 to 160 × 80 cm
Control Flex+ 140 desk – black frame, white desktop – left view

One desktop, no joint in the middle

The desktop is 18 mm thick and made of a single laminated board with 2 mm ABS edge banding. With no gap in the middle it is easy to wipe, and you can mount a monitor arm anywhere along the edge.

  • 138 × 67 cm
  • 18 mm laminated board, 2 mm ABS edge banding
  • Colors: white, black, Gold Craft Oak
Control Flex+ 140 desk – black frame, white desktop, in a room setting – standing position

Stable while typing and at full height

The powder-coated steel and aluminum frame stands on 60 cm deep feet. Anti-vibration pads between the frame and the desktop dampen vibrations, and the 70 kg load capacity leaves headroom for your equipment.

  • Steel and aluminum, powder-coated
  • 10 anti-vibration pads included
  • 70 kg load capacity

Assembly

How installation works

  • Tools: only a set of Allen keys is included; you need your own power drill/driver to screw on the desktop (no pre-drilled holes)
  1. Assemble the frameScrew the crossbar ends and the desktop arms to the top of both columns with M6 × 11 screws.
  2. Screw on the feetScrew the feet to the bottom of the columns with M6 × 35 screws using a 5 mm Allen key.
  3. Set the leg spacingSlide the telescopic crossbar between the columns, extend it to the width you want (90–135 cm), then tighten it.
  4. Connect the driveSlide the drive shaft into the holes in both columns and tighten the clamping screw with a 2 mm Allen key.
  5. Screw on the desktopLay the desktop face down, apply the anti-vibration pads, place the inverted frame on it and screw it on with M5 × 15 screws.
  6. Connect and resetScrew on the controller, connect the motor, controller and power supply cables, and run them through the clips. Before first use, hold the down arrow until “RES” appears.
The desktop has no pre-drilled holes, so before screwing it on, position the frame the way you like: wider if a drawer unit or a second person will sit under the desk, narrower for a smaller desktop.

What's in the box

  • frame: 2 columns (one with motor), telescopic crossbar, 2 desktop arms, 2 feet, drive shaft
  • controller with display and power supply
  • 138 × 67 cm desktop
  • screws M6 × 11 (12 pcs), M6 × 35 (8 pcs), M5 × 15 for the desktop (10 pcs), M3.5 × 19 for the controller (2 pcs)
  • 10 anti-vibration pads, 5 cable clips

Safety: Do not exceed a load of 70 kg and do not sit on the desktop. Plug in the power only after assembly is complete. Use only in dry rooms.

Assembling the Control Flex+ deskAssembling the frame, setting the leg spacing, screwing on the desktop and connecting the controller.

Which model should you choose?

Control LiteControl Flex+Control Pro
Motors112
Height range72–118 cm72–118 cm72–120 cm
Load capacity70 kg70 kg100 kg
Speed20 mm/s20 mm/s25 mm/s
Frame width90–135 cm90–135 cm100–170 cm
Memory presets333

Control Flex+ electric desk specifications

Adjustment
Height adjustmentelectric, 1 motor
Frame height range72–118 cm
Adjustment speed20 mm/s
Memory presets3
Controllerdisplay, ▲ ▼ S 1 2 3 buttons
Collision sensoryes, adjustable sensitivity / off
Frame
Materialsteel and aluminum, powder-coated
Frame width90–135 cm (telescopic crossbar)
Foot depth60 cm
Load capacity70 kg
Recommended desktopfrom 100 × 60 to 160 × 80 cm
Frame weight14.8 kg net
Desktop
Dimensions138 × 67 cm
Thickness18 mm
Materiallaminated board, 2 mm ABS edge banding
Constructionone piece
Desktop colorwhite
Frame colorblack
Power and conditions
Power supply100–240 V
Operating temperaturefrom -5 to +40 °C
General
Warranty36 months
Delivery conditionself-assembly
Manufacturer / importerEKO-LIGHT TEAM Sp. z o.o., Częstochowa

Questions about this product

Is the Control Flex+ desktop one piece?
Yes. The 138 × 67 cm Control Flex+ desktop is a single 18 mm laminated board with no joint in the middle.
What is the height adjustment range of the Control Flex+?
The Control Flex+ frame adjusts electrically from 72 to 118 cm. With an 18 mm desktop, the work surface sits at approx. 74–120 cm.
What are the weight and load capacity of the Control Flex+ desk?
The Control Flex+ has a load capacity of 70 kg with an evenly distributed load. The frame alone weighs 14.8 kg net.
Can I mount the Control Flex+ frame under my own desktop?
Yes. The Control Flex+ frame extends from 90 to 135 cm wide and is designed for desktops from 100 × 60 to 160 × 80 cm. You attach the desktop with the M5 × 15 screws included.
How wide can I set the legs of the Control Flex+ desk?
The crossbar is telescopic: you set the frame width between 90 and 135 cm. The desktop has no pre-drilled holes, so you choose where the frame goes during assembly.
Does the Control Flex+ desk remember height settings?
Yes. The Control Flex+ controller has 3 memory presets: press “S”, then 1, 2 or 3 to save a height, and the same number to return to it.
Does the Control Flex+ have collision protection?
Yes. The anti-collision sensor stops the desktop when it meets an obstacle (code E02). You can change the sensitivity in the controller settings (“CF” option) or turn detection off.
How do I reset the Control Flex+ desk?
Hold the down arrow until “RES” appears on the screen, and keep holding until the desktop lowers to its minimum height and rises slightly. Reset before first use and when error E60 appears.

Bezpieczeństwo produktu

Manufacturer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Responsible person in the EU

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Importer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Rekomendowane dla Ciebie

    Najczęściej wybierane

    Sprawdzone rozwiązania, które realnie poprawiają komfort pracy