Skip to main content
Products in the cart: 0. See details

Electric Height-Adjustable Desk Flex+ Black-Gold Craft Oak 120/67 and Control Series Black Ergonomic Chair Set

Price 1 349,00 zł
Availability:
available to order
Shipping time: 30 days
Ask about the product
pcs

Opis

Control Flex+ Set

A desk and chair that work with you

The Control Flex+ set is an electric desk with 72–118 cm adjustment and 3 memory presets, plus the Control Series chair with a synchro-tilt mechanism and 3D armrests. You order the whole workstation at once, for less than buying separately.

  • 72–118 cm of desk adjustment
  • 3 height memory presets
  • Recline 90–135°
  • 3D armrests

Key specifications at a glance

46 cmof desk adjustment range

frame from 72 to 118 cm — set the desktop to elbow height whether sitting or standing

approx. 23 sfrom bottom to top

at 20 mm/s, changing position does not interrupt your work

46–56 cmseat height

10 cm of adjustment so your feet rest flat and your elbows are at desktop height

130 kgchair load capacity

Control Series chair with a mesh seat and backrest

Why the Control Flex+ Set with the Control Series Chair

  • Everything in one order – desk and chair in matching colors, for less than buying them separately
  • Work sitting or standing – frame height 72–118 cm and 3 height memory presets
  • One-piece 18 mm desktop – 120 × 67 cm, no joint in the middle
  • You set the leg spacing – frame 90–120 cm, and the desktop has no pre-drilled holes
  • A chair you set to fit you – seat 46–56 cm, 3D armrests, headrest adjustable in 2 axes
  • Backrest with rocking and lock – synchro-tilt mechanism, 90–135° recline, 4 lock positions
  • Load capacity: desk 70 kg, chair 130 kg – both with a 36-month warranty
Control Flex+ 120 × 67 cm desk set – black frame, Gold Craft Oak desktop – with Control Series black chair

The whole workstation in one order

You don't have to match a chair to your desk. The set combines the Control Flex+ desk with the Control Series chair in the same frame color and costs less than buying both separately — by PLN 49–69 according to the price list of 16.10.2026.

  • Control Flex+ desk 120 × 67 cm
  • Control Series chair with headrest and 3D armrests
  • White chair with a white frame, black with black
  • Desktop: white, black or Gold Craft Oak
Control Flex+ set in actionAdjusting the desk from sitting to standing, saving a memory preset, setting up the chair: seat height, armrests, headrest, backrest lock.
Control Flex+ 120 desk – black frame, Gold Craft Oak desktop in a room setting – sitting position – set with Control Series black chair

Sitting in the morning, standing in the afternoon

A single motor in the column raises the desktop at 20 mm/s, and the display shows the current height. The desktop travels from the lowest to the highest position in approx. 23 s, so you change position without interrupting your work.

  • Frame height range 72–118 cm
  • With an 18 mm desktop: work surface approx. 74–120 cm
  • Load capacity 70 kg, evenly distributed
Control Flex+ 120 desk – black frame, Gold Craft Oak desktop – right view – set with Control Series black chair

Your heights under one button

The controller has a display and three memory buttons. You save a sitting and a standing height, then return to them with one press. The collision sensor stops the desktop when it hits an obstacle.

  • 3 memory presets: buttons 1, 2, 3
  • Collision sensor sensitivity adjustable or switchable off
  • Change units and display brightness
Control Flex+ 120 desk – black frame, Gold Craft Oak desktop – front view – set with Control Series black chair

One desktop and leg spacing you choose yourself

The desktop is a single 18 mm laminated board with no joint in the middle. It has no pre-drilled holes and the frame crossbar is telescopic, so during assembly you decide how much room to leave for your legs and a drawer unit.

  • Adjustable frame 90–120 cm
  • 60 cm deep feet
  • Laminated board, 2 mm ABS edge banding
Control Series black chair dimensions from the front – backrest 45 cm, seat 50 cm – set with Control Flex+ 120 desk

A chair set to your body

On the Control Series chair you adjust the seat height, the armrests in three directions and the headrest for height and angle. The seat, two-piece backrest and headrest are made of breathable mesh.

  • Seat 46–56 cm from the floor, 50 × 50 cm
  • 3D armrests: 27–35 cm above the seat
  • Headrest: 5 cm vertical and 45° angle
Backrest tilt 90–135° with lock – Control Series black chair – set with Control Flex+ 120 desk

Recline or lock the backrest

The synchro-tilt mechanism reclines the backrest within 90–135° and lets you rock. When you work, you lock it in one of 4 positions. The lower, lumbar part of the backrest is a separate, moving element.

  • Synchro-tilt mechanism, 4 lock positions
  • Active lumbar support
  • Nylon base Ø 60 cm, 60 mm PU casters

Assembly

How installation works

  • Tools: only a set of Allen keys is included for the desk and a T-handle key for the chair; you need your own screwdriver to attach the desktop (no pre-drilled holes)
  1. Desk: assemble the frameScrew the crossbar end pieces and desktop supports to the columns with M6 × 11 screws, and the feet to the bottom of the columns with M6 × 35 screws.
  2. Desk: set the leg spacingSlide the telescopic crossbar between the columns, extend it to the chosen width (90–120 cm) and tighten. Insert the drive shaft and tighten the clamp.
  3. Desk: attach the desktopLay the desktop face down, apply the anti-vibration pads, place the inverted frame on it and screw it on with M5 × 15 screws.
  4. Desk: connect and resetScrew on the controller, connect the motor, controller and power supply cables and route them in the clips. Hold the down arrow until "RES" appears.
  5. Chair: casters and gas liftPress the 5 casters into the arms of the base and insert the gas lift into the hole in the middle of the base.
  6. Chair: seatTo the upturned seat, screw the armrests (3 screws each), the mechanism (4 screws) and the backrest bracket (3 screws).
  7. Chair: join to the basePlace the seat with the mechanism on the gas lift in the base.
  8. Chair: backrest and headrestScrew the backrest to the bracket and the headrest to the back of the backrest, and fit the covers over both joints.
The desktop has no pre-drilled holes, so before screwing it on, position the frame as suits you — wider when a drawer unit goes under the desk, narrower for a smaller desktop.

What's in the box

  • frame: 2 columns (one with a motor), telescopic crossbar, 2 desktop supports, 2 feet, drive shaft
  • controller with display, power supply and 120 × 67 cm desktop
  • for the desk: screws, 10 anti-vibration pads, 5 cable clips
  • chair: two-piece backrest, seat, 2 armrests, mechanism, backrest bracket, gas lift
  • chair: 5-star base, 5 casters, headrest, 2 covers, full set of screws with spares

Safety: Do not exceed the desk's 70 kg load and do not sit on the desktop. Plug the desk in only after assembly is complete. Use only in dry rooms.

Assembling the Control Flex+ desk and Control Series chairAssembling the frame, setting the leg spacing, attaching the desktop, connecting the controller; assembling the chair base, seat, backrest and headrest.

Which set to choose?

Lite SetFlex+ SetControl Pro Set
DeskControl Lite 140Control Flex+Control Pro
Desktop140 × 60 cm, 15 mm, 3-piece120 × 67 / 138 × 67 cm, 18 mm, one-piece120 × 67 / 138 × 67 cm, 18 mm, one-piece
Motors112
Height range72–118 cm72–118 cm72–120 cm
Speed20 mm/s20 mm/s25 mm/s
Desk load capacity50 kg70 kg100 kg
Frame width90–120 cm90–120 cm100–170 cm
Memory presets333
ChairErgo LiteControl SeriesControl Pro
Chair mechanismtilt with tension adjustmentsynchro-tilt, lock in 4 positionssynchro-tilt, lock in 4 positions
Seat depth50 cm, fixed50 cm, fixed50 cm + 10 cm slider
Armrestsfolding3D3D
Chair load capacity120 kg130 kg130 kg
Chair basenylon, Ø 58 cmnylon, Ø 60 cmchrome, Ø 60 cm

Specifications: Control Flex+ Set with Control Series Chair

Control Flex+ desk
Height adjustmentelectric, 1 motor
Frame height range72–118 cm
Adjustment speed20 mm/s
Memory presets3
Controllerdisplay, ▲ ▼ S 1 2 3 buttons
Collision sensoryes, adjustable sensitivity / off
Frame width90–120 cm (telescopic crossbar)
Foot depth60 cm
Load capacity70 kg
Desktop120 × 67 cm, one-piece
Desktop thickness and material18 mm, laminated board, 2 mm ABS edge banding
Frame materialsteel and aluminum, powder-coated
Frame weight14.8 kg net
Power supply100–240 V
Control Series chair
Seat height46–56 cm (10 cm adjustment)
Seat (W × D)50 × 50 cm, no depth adjustment
Backrest width45 cm
Chair height118–128 cm
Mechanismsynchro-tilt with rocking
Backrest recline90–135°, lock in 4 positions
Lumbar supportactive (moving lower part of the backrest)
Armrests3D, 27–35 cm above the seat
Headrestheight adjustment 5 cm and angle 45°
Materialmesh (seat, backrest, headrest)
Basenylon, 5-star, Ø 60 cm
Casterspolyurethane, 60 mm, 5 pcs
Gas liftclass 3
Load capacity130 kg
Weight15.6 kg net, 17.6 kg with box
General
Colorblack frame / Gold Craft Oak desktop / black chair
Warranty36 months
Delivery conditionself-assembly
Manufacturer / importerEKO-LIGHT TEAM Sp. z o.o., Częstochowa
Country of manufacture of frame and chairChina (per the box)

Questions about this product

Is the desktop in the Control Flex+ set one piece?
Yes. The 120 × 67 cm Control Flex+ desktop is a single 18 mm laminated board with no joint in the middle.
What is the adjustment range of the desk and chair in the Control Flex+ set?
You adjust the Control Flex+ desk frame electrically within 72–118 cm (approx. 74–120 cm with an 18 mm desktop). You can set the Control Series chair seat at 46–56 cm from the floor.
How much can the desk and chair in the Control Flex+ set hold?
The Control Flex+ desk has a load capacity of 70 kg evenly distributed, and the Control Series chair 130 kg.
How wide can I set the legs of the Control Flex+ desk?
The Control Flex+ frame crossbar is telescopic: you set the frame width within 90–120 cm. The desktop has no pre-drilled holes, so you choose the frame position yourself during assembly.
Does the Control Series chair have lumbar support?
Yes. The Control Series chair has active lumbar support: the lower part of the two-piece backrest is a separate, moving element.
Does the Control Series chair have a rocking function and a backrest lock?
Yes. The Control Series chair has a synchro-tilt mechanism with a rocking function. The backrest reclines within 90–135° and can be locked in 4 positions.
Does the Control Series chair have seat depth adjustment?
No. The Control Series chair (white and black) has a seat with a fixed depth of 50 cm. The Control Pro chair from the Control Pro set has a 10 cm seat slider.
Does the Control Flex+ set arrive assembled?
No. The Control Flex+ desk and Control Series chair are for self-assembly. Only Allen keys are included. You need your own screwdriver to attach the desktop.

Bezpieczeństwo produktu

Manufacturer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Responsible person in the EU

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Importer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Rekomendowane dla Ciebie

    Najczęściej wybierane

    Sprawdzone rozwiązania, które realnie poprawiają komfort pracy