Skip to main content
Products in the cart: 0. See details

Control Pro Black Gold Craft Oak 120/67 electric height-adjustable desk and black Control Pro ergonomic office chair set

Price 1 849,00 zł
Availability:
available to order
Shipping time: 30 days
Ask about the product
pcs

Opis

Control Pro Set

Dual drive and a chair that fits you at every point

The Control Pro set includes a dual-motor desk with a 72–120 cm range and 100 kg load capacity, plus a Control Pro chair with a 10 cm seat slider and a synchro-tilt mechanism. You order the whole workstation at once, for less than buying the pieces separately.

  • 2 motors
  • 72–120 cm desk height range
  • 100 kg desk load capacity
  • Seat slider 10 cm

Key specifications at a glance

approx. 19 sfrom bottom to top

48 cm of travel at 25 mm/s — two motors change position quickly and evenly

100 kgdesk load capacity

room for two monitors on an arm, a computer and accessories

100–170 cmframe width

adjust the telescopic beams to the desktop and to the legroom you need

10 cmseat slide

set the seat depth to your thigh length, not just the height

Why the Control Pro set: Control Pro desk and chair

  • Everything in one order – a Control Pro desk and chair, for less than buying them separately
  • 2 motors, 25 mm/s – from the lowest to the highest position in about 19 s, 100 kg load capacity
  • Controller with timer and USB – 3 memory presets, reminder to change position, 10 W charging
  • You set the leg spacing – 100–170 cm frame, and the desktop has no pre-drilled holes
  • One-piece 18 mm desktop – 120 × 67 cm, no joint in the middle
  • Chair with seat depth adjustment – 10 cm seat slider, 3D armrests, 2D headrest
  • Synchro-tilt mechanism with lock – 90–135° recline, 4 lock positions, 130 kg chair load capacity
Control Pro 120 × 67 cm desk set – black frame, Gold Craft Oak desktop – with black Control Pro chair

The whole workstation in one order

The set pairs the Control Pro desk with the Control Pro chair in the same frame color. You don't have to compare separate offers, and the set costs less than both pieces bought separately — by PLN 49–99 according to the price list of October 16, 2026.

  • Control Pro desk 120 × 67 cm
  • Control Pro chair with headrest and 3D armrests
  • White chair with a white frame, black with black
  • Desktop: white, black or Gold Craft Oak
The Control Pro set in actionAdjusting the desk from sitting to standing, saving memory presets, timer; setting up the chair: seat slider, armrests, headrest, backrest lock.
Control Pro 120 desk – black frame, Gold Craft Oak desktop – side view – set with black Control Pro chair

From sitting to standing in about 19 seconds

Each column has its own motor, so the desktop moves at 25 mm/s, evenly on both sides. The frame adjusts from 72 to 120 cm, and leveling feet keep the desk stable on an uneven floor.

  • 2 motors in the columns
  • With an 18 mm desktop: work surface at approx. 74–122 cm
  • 100 kg load capacity with evenly distributed weight
Control panel with display under the desktop of the Control Pro 120 desk – set with black Control Pro chair

A controller that reminds you to stand up

Save 3 heights and return to any of them with one press of a number. The timer, set in 30-minute steps (up to 2 h), uses a light and a sound to tell you it's time to change position. Charge your phone from the USB port.

  • T, M, ▲ ▼, 1, 2, 3 buttons and display
  • USB-A port 5 V / 2 A (10 W)
  • Panel lock: hold “M” for 3 s
  • Gyroscope anti-collision, sensitivity 0–8
Control Pro 120 desk – black frame, Gold Craft Oak desktop – front view – set with black Control Pro chair

Adjustable leg spacing and a single desktop, no compromises

The desktop is a single 18 mm board, with no joint in the middle and no pre-drilled holes. The frame beams extend from 100 to 170 cm, so during assembly you decide how much legroom to leave.

  • Adjustable frame 100–170 cm
  • 60 cm deep feet
  • Laminated board with ABS edge banding
10 cm seat slider – seat depth adjustment on the black Control Pro chair – set with Control Pro 120 desk

A chair you can adjust for depth too

The Control Pro chair's seat slides 10 cm, so you can set it to your thigh length. You can also adjust the seat height, the armrests in three directions and the headrest's height and angle.

  • Seat 46–56 cm from the floor, 50 × 50 cm
  • Armrests: 8 cm vertical, 5 cm forward–back, 15° rotation
  • Headrest: 5 cm vertical and 45° angle
Control buttons by the seat of the black Control Pro chair – set with Control Pro 120 desk

Adjustments at hand, right by the seat

You operate the synchro-tilt mechanism with buttons on the side of the seat. The backrest reclines from 90 to 135° and locks in one of 4 positions. The seat, backrest and headrest are made of breathable mesh.

  • Active lumbar support
  • Chrome base, Ø 60 cm
  • Double polyurethane casters, 60 mm

Assembly

How installation works

  • 2 people to turn the desk over (per the instructions)
  • Tools: only a set of Allen keys is included for the desk and a T-handle key for the chair; you need your own screwdriver to attach the desktop (no pre-drilled holes)
  1. Desk: assemble the crossbarsSlide the left and right crossbars into the column and screw them in place. Repeat with the second column.
  2. Desk: brackets and feetScrew on the desktop brackets with the anti-vibration pads, and attach the feet to the bottom of the columns.
  3. Desk: set the width and attach the desktopLay the desktop on a soft surface, extend the beams to the chosen width (100–170 cm), lock them and screw the frame to the desktop.
  4. Desk: connect, level, resetScrew on the controller, connect the columns and the power supply, and route the cables through the clips. Turn the desk over with a second person, level the feet and hold ▲▼ until “rSt” appears.
  5. Chair: casters and gas liftPress the 5 casters into the arms of the base and insert the gas lift into the hole in the middle of the base.
  6. Chair: seatTurn the seat upside down and screw on the armrests (3 screws each) and the backrest bracket (3 screws).
  7. Chair: join to the baseFit the seat onto the gas lift in the base.
  8. Chair: backrest and headrestScrew the backrest to the bracket and the headrest to the back of the backrest, and fit the covers over both joints.
The desktop has no pre-drilled holes, so you set the frame width before screwing it on — wider if a drawer unit or a second person will be under the desk, narrower for a smaller desktop.

What's in the box

  • frame: 2 motorized columns, 2 feet, 2 desktop brackets, 4 crossbars, 2 sliding beams
  • display controller, power supply, power cord, extension cable for the second column
  • for the desk: bolts and screws, 12 anti-vibration pads, 7 cable clips
  • 120 × 67 cm desktop
  • chair: two-part backrest, seat with mechanism, 2 armrests, backrest bracket, gas lift
  • chair: 5-star base, 5 casters, headrest, 2 covers, full set of screws with spares

Safety: Turn the desk over with the help of a second person. Do not plug the desk into an outlet before assembly is complete. Do not exceed the 100 kg load and do not sit on the desktop.

Assembling the Control Pro desk and chairAssembling the frame, adjusting the width to the desktop, attaching the desktop and controller, leveling; assembling the chair's base, seat, backrest and headrest.

Which set to choose?

Lite SetFlex+ SetControl Pro Set
DeskControl Lite 140Control Flex+Control Pro
Desktop140 × 60 cm, 15 mm, 3-piece120 × 67 / 138 × 67 cm, 18 mm, one-piece120 × 67 / 138 × 67 cm, 18 mm, one-piece
Motors112
Height range72–118 cm72–118 cm72–120 cm
Speed20 mm/s20 mm/s25 mm/s
Desk load capacity50 kg70 kg100 kg
Frame width90–135 cm90–135 cm100–170 cm
Memory presets333
ChairErgo LiteControl SeriesControl Pro
Chair mechanismtilt with tension adjustmentsynchro-tilt, lock in 4 positionssynchro-tilt, lock in 4 positions
Seat depth50 cm, fixed50 cm, fixed50 cm + 10 cm slider
Armrestsfolding3D3D
Chair load capacity120 kg130 kg130 kg
Chair basenylon, Ø 58 cmnylon, Ø 60 cmchrome, Ø 60 cm

Control Pro set specifications: Control Pro desk and chair

Control Pro desk
Height adjustmentelectric, 2 motors
Frame height range72–120 cm
Adjustment speed25 mm/s
Memory presets3, one-touch travel
Controllerdisplay, T M ▲ ▼ 1 2 3 buttons, timer up to 2 h
USB portUSB-A, 5 V / 2 A (10 W)
Anti-collisiongyroscope-based, adjustable sensitivity 0–8
Frame width100–170 cm (telescopic beams)
Foot depth60 cm, leveling feet
Load capacity100 kg
Recommended desktop width110–200 cm
Desktop120 × 67 cm, one-piece
Desktop thickness and material18 mm, laminated board, ABS edge banding
Frame materialsteel and aluminum, powder-coated
Frame weight19.8 kg net
Power supply100–240 V
Control Pro chair
Seat height46–56 cm (10 cm adjustment)
Seat (W × D)50 × 50 cm, 10 cm slider
Backrest width45 cm
Chair height118–128 cm
Mechanismsynchro-tilt, button controls by the seat
Backrest recline90–135°, lock in 4 positions
Lumbar supportactive
Armrests3D: height 8 cm (27–35 cm above the seat), forward–back 5 cm, rotation 15°
Headrestheight adjustment 5 cm and angle 45°
Materialmesh (seat, backrest, headrest)
Base5-star, chrome, Ø 60 cm
Casterspolyurethane, double, 60 mm
Gas liftclass 3
Load capacity130 kg
Weight16.8 kg net, 18.8 kg with box
General
Colorblack frame / Gold Craft Oak desktop / black chair
Warranty36 months
Delivery conditionself-assembly
Manufacturer / importerEKO-LIGHT TEAM Sp. z o.o., Częstochowa
Country of manufacture of frame and chairChina (per the box)

Questions about this product

Is the desktop in the Control Pro set one piece?
Yes. The 120 × 67 cm Control Pro desktop is a single 18 mm laminated board with no joint in the middle.
Do I have to hold the button to move to a saved height?
No. On the Control Pro desk, you press a memory number (1, 2 or 3) once and the desktop moves to the saved height on its own.
How much weight can the Control Pro desk and chair hold?
The Control Pro desk has a load capacity of 100 kg with evenly distributed weight, and the Control Pro chair 130 kg.
What is the seat height range of the Control Pro chair?
The Control Pro chair seat adjusts from 46 to 56 cm above the floor (10 cm of adjustment). You can also slide it 10 cm forward or back.
How does the Control Pro chair differ from the Control Series chair?
The Control Pro chair also has a 10 cm seat slider, button controls on the side of the seat and a chrome base. Both have a synchro-tilt mechanism, 90–135° recline, 3D armrests, mesh and a 130 kg load capacity.
What are the Control Pro chair casters made of?
The Control Pro chair has 5 double polyurethane casters, 60 mm in diameter.
How wide can I set the legs of the Control Pro desk?
The Control Pro desk frame extends from 100 to 170 cm. The desktop has no pre-drilled holes, so you choose the frame position yourself during assembly.
Does the Control Pro set arrive assembled?
No. The Control Pro desk and chair are for self-assembly. Only Allen keys are included. You need your own drill driver to attach the desktop, and a second person will help you turn the desk over.

Bezpieczeństwo produktu

Manufacturer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Responsible person in the EU

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Importer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Rekomendowane dla Ciebie

    Najczęściej wybierane

    Sprawdzone rozwiązania, które realnie poprawiają komfort pracy