Skip to main content
Products in the cart: 0. See details

Control Pro Frame White LVNSystem

Price 928,99 zł
Availability:
high stock
Shipping time: 24 hours
Ask about the product
pcs

Opis

Control Pro series

Two motors under your desktop

Control Pro is an electric desk frame with two motors, a 100 kg load capacity and a 100–170 cm frame. The desktop moves at 25 mm/s, and the controller saves 3 heights and reminds you to change position.

  • 2 motors
  • 100 kg load capacity
  • Frame 100–170 cm
  • 10 W USB in the controller

Key specifications at a glance

48 cmadjustment travel

frame height from 72 to 120 cm — comfortable for tall people working standing, too

approx. 19 sfrom bottom to top

at 25 mm/s you stand up from your desk without waiting

100 kgload capacity

a large desktop, two monitors, a computer and a lamp fit with room to spare

100–170 cmframe width

adjust the spacing to a desktop 110 to 200 cm wide

Why the Control Pro Electric Frame

  • Two motors, 100 kg load capacity – a motor in each column and headroom for a large desktop and equipment
  • 72–120 cm in approx. 19 s – the desktop moves at 25 mm/s
  • Frame 100–170 cm – for desktops from 110 × 60 to 200 × 80 cm
  • You set the leg spacing – the frame screws to a desktop without pre-drilled holes
  • 3 memory presets and a timer – the controller reminds you with a sound and an LED that it's time to change position
  • 10 W USB port – charge your phone straight from the controller
  • Gyroscopic anti-collision – the frame stops at an obstacle, with sensitivity adjustable on a 0–8 scale
Control Pro white frame – left view

Standing in under 20 seconds

Two motors, one in each column, raise the desktop at 25 mm/s. You cover the full 72–120 cm range in approx. 19 s, and with an 18 mm desktop the work surface sits at approx. 74–122 cm.

  • 2 motors in the columns
  • Frame height range 72–120 cm
  • Adjustment speed 25 mm/s
Control Pro in actionBoth motors moving from sitting to standing, saving a memory preset, the timer and stopping at an obstacle.
Control Pro frame touch panel with 3 memory presets

A controller that keeps track of your breaks

The touch panel shows the height, and you save your favorite positions under buttons 1, 2 and 3. The T button starts a timer of up to 2 hours — an LED and a sound remind you it's time to stand up. You lock the panel by holding M for 3 seconds.

  • 3 memory presets
  • Timer in 30 min steps, max. 2 hours
  • USB-A port 5 V / 2 A (10 W)
  • Panel lock
Control Pro white frame dimensions – frame 100–170 cm, height 72–120 cm

You set the leg spacing

The crossbars are telescopic: the frame extends from 100 to 170 cm. You screw the frame to a desktop without pre-drilled holes, so you choose how wide to space the legs and how much room to leave for your knees, a drawer unit or a second person.

  • Adjustable frame 100–170 cm
  • Desktop from 110 × 60 to 200 × 80 cm
  • 60 cm deep feet
Control Pro white frame – front view

Safe for your hands, desktop and equipment

Gyroscopic anti-collision stops the desktop when it hits an obstacle (code E05). In the controller settings you can change the sensitivity separately for moving up and down, and set minimum and maximum height limits.

  • Anti-collision and gyroscope sensitivity on a 0–8 scale
  • Custom min. and max. height limits
  • Desktop thickness in settings: 0.1–5.0 cm
Foot and column of the Control Pro white frame – close-up

Stable at any height

The powder-coated steel and aluminum frame stands on 60 cm deep feet. Leveling feet even it out on an uneven floor, and 12 anti-vibration pads between the frame and the desktop dampen vibration.

  • Steel and aluminum, powder-coated
  • Leveling glides in each foot
  • Colors: white or black

Assembly

How installation works

  • 2 people to turn the desk over (per the instructions)
  • Tools: only a set of Allen keys is included; you need your own power drill/driver to screw on the desktop (no pre-drilled holes)
  1. Assemble the crossbarsScrew the M6 × 12 screws into the columns, leaving a gap of approx. 3 mm, slide on the left and right crossbars and tighten the screws.
  2. Attach the supports and feetScrew the desktop supports to the columns with M6 × 10 screws and fit the anti-vibration pads. Screw on the feet with M6 × 16 screws.
  3. Set the frame widthSlide the beams into the crossbars, match the frame width to the desktop (100–170 cm) and lock them with M6 × 12 screws.
  4. Screw on the desktopLay the desktop upside down on a soft surface, position the frame on it and screw it on with 12 ST4.2 × 16 screws.
  5. Connect the cablesConnect the controller to the power supply and the columns — use the extension cable for the farther one. Screw the controller (and optionally the power supply) to the desktop and route the cables in the clips.
  6. Level and resetTurn the desk over with a second person, level it with the glides and plug it in. Before first use, hold ▲ and ▼ together until "rSt" appears and you hear the second beep.
The desktop needs no pre-drilled holes, so you decide the leg spacing — wider for a large desktop and two people, narrower when a drawer unit stands next to it. Put a blanket under the desktop so it doesn't get scratched.

What's in the box

  • 2 columns with motors, 2 feet, 2 side desktop supports
  • telescopic crossbars: 2 left, 2 right and 2 sliding beams
  • controller with display, power supply, power cord and extension cable for the second column
  • screws M6 × 10 (4 pcs), M6 × 12 (16 pcs), M6 × 16 (8 pcs); ST4.2 × 16 screws for the desktop (12 pcs) and for the power supply (5 pcs), ST3.9 × 38 for the controller (2 pcs), ST3.5 × 13 (2 pcs)
  • 12 anti-vibration pads, 7 cable clips, set of Allen keys
  • desktop not included

Safety: Do not connect power until the desk is fully assembled. Turn the desk over with the help of a second person. Do not exceed a 100 kg load and do not sit on the desktop.

Assembling the Control Pro frameAssembling the crossbars, setting the frame width, attaching the desktop, connecting the columns and leveling.

Which frame should you choose?

Control LiteControl Flex+Control Pro
Motors112
Height range72–118 cm72–118 cm72–120 cm
Load capacity70 kg70 kg100 kg
Speed20 mm/s20 mm/s25 mm/s
Frame width90–135 cm90–135 cm100–170 cm
Foot depth58 cm60 cm60 cm
Recommended desktop—100–160 × 60–80 cm110–200 × 60–80 cm
Memory presets333
Collision sensor—yes, adjustable sensitivityyes, gyroscopic, sensitivity 0–8
Position change timer——yes
USB port in the controller——USB-A 10 W
Frame weight12 kg14.8 kg19.8 kg

Specifications: Control Pro Electric Frame

Adjustment
Height adjustmentelectric, 2 motors
Frame height range72–120 cm
Adjustment speed25 mm/s
Memory presets3
Controllertouch panel with display: ▲ ▼ T M 1 2 3
Position change timerup to 2 hours, in 30 min steps
Anti-collisiongyroscopic, sensitivity 0–8 (up, down, gyroscope)
Panel lockyes
Frame and desktop
Frame width100–170 cm (telescopic crossbars)
Frame depth (feet)60 cm
Recommended desktopfrom 110 × 60 to 200 × 80 cm
Desktop mounting12 ST4.2 × 16 mm screws, no pre-drilled holes needed in the desktop
Levelingleveling glides
Desktop includedno
Construction
Materialsteel and aluminum, powder-coated
Load capacity100 kg (evenly distributed load)
Frame weight19.8 kg net, 21.2 kg with packaging
Packaging1 box 98 × 30.5 × 14.5 cm
Colorwhite
Power and conditions
Power supply100–240 V, external power supply
USB portUSB-A 5 V / 2 A (10 W)
Panel sleepafter approx. 10 min of inactivity
Operating temperaturefrom -5 to +40 °C
General
Warranty36 months
Delivery conditionself-assembly, instructions and Allen keys included
MarkingsCE
Manufacturer / importerEKO-LIGHT TEAM Sp. z o.o., Częstochowa

Questions about this product

How do I attach a desktop to the Control Pro frame?
Lay the desktop upside down, place the frame on it extended to the desktop width and screw it on with the 12 ST4.2 × 16 screws included. The desktop needs no pre-drilled holes, so you choose the Control Pro leg spacing yourself.
Will the Control Pro frame fit a 100 cm wide desktop?
No. The Control Pro frame is at least 100 cm wide, and the recommended desktops are 110–200 cm wide and 60–80 cm deep. For a 100 cm desktop, choose the Control Flex+ frame (desktops from 100 × 60 cm).
How much can the Control Pro frame hold, and how much does it weigh?
The Control Pro load capacity is 100 kg with an evenly distributed load. The frame weighs 19.8 kg net and 21.2 kg with packaging — it arrives in one 98 × 30.5 × 14.5 cm box.
Do the Control Pro feet have leveling?
Yes. There are leveling glides under each Control Pro foot — turn them to level the frame on an uneven floor.
How do I save a height to memory on Control Pro?
Set the desktop, press "M", and when "S-" appears, choose 1, 2 or 3. To return to a saved height, press its number. Control Pro has 3 memory presets.
How do I reduce the anti-collision sensitivity on Control Pro?
Hold "M" and "T" together until "S-1" appears. Use the arrows to choose S-3 (moving up), S-4 (down) or S-5 (gyroscope), press "M", set the sensitivity on a 0–8 scale and confirm with "M".
What does "---" on the Control Pro display mean?
That is the Control Pro panel lock — the controller does not respond to touch. You turn it on and off by holding "M" for 3 seconds. In setting S-7 you decide whether the lock is available.
How do I reset the Control Pro frame?
Hold ▲ and ▼ together until you hear a beep and see "rSt". Keep holding until the second beep — the desktop rises slightly and the height appears. Reset Control Pro before first use and when error E02 appears.

Bezpieczeństwo produktu

Manufacturer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Responsible person in the EU

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Importer

EKO-LIGHT TEAM SP. Z O.O.

Główna 142

42-280 Częstochowa, Poland

kontakt@lvnsystem.pl

Rekomendowane dla Ciebie

    Najczęściej wybierane

    Sprawdzone rozwiązania, które realnie poprawiają komfort pracy