Skip to main content
Products in the cart: 0. See details

Desktop Tabletop Black 160 × 80 cm LVNSystem

Price 299,00 zł
Availability:
high stock
Shipping time: 24 hours
Ask about the product
pcs

Opis

Desktop tabletops

A large tabletop for a height-adjustable desk

The Desktop 160 × 80 cm tabletop is a black 18 mm laminated board with 2 mm ABS edge banding. It has no pre-drilled holes, so you can attach the frame exactly where it suits you.

  • 160 × 80 cm
  • 18 mm laminated board
  • Black
  • No pre-drilled holes

Key specifications at a glance

160 cmwidth

40 cm more than a 120 × 67 cm desktop — room for two screens side by side

80 cmdepth

13 cm more than 67 cm desktops — move the monitor farther from your eyes

approx. 1.28 m²of work surface

equipment, documents and accessories fit without rearranging

18 mmboard thickness

on a 72–118 cm frame the work surface sits at about 74–120 cm

Why the Desktop 160 × 80 cm Black tabletop

  • 160 × 80 cm, approx. 1.28 m² – 40 cm wider and 13 cm deeper than a 120 × 67 cm desktop
  • 18 mm laminated board – a surface that's easy to clean during everyday work
  • 2 mm ABS edge banding – finished board edges
  • No pre-drilled holes – screw on the frame with a drill driver wherever you want
  • Fits Control Flex+ and Control Pro – within the recommended desktop range of both frames
  • Made in Poland – 36-month warranty
Black Desktop tabletop 160 × 80 cm – top view

More room for equipment and documents

The tabletop is 160 cm wide and 80 cm deep, which gives about 1.28 m² of surface. That's 40 cm wider and 13 cm deeper than a 120 × 67 cm desktop — you fit more equipment and move the monitor farther from your eyes.

  • 160 × 80 cm
  • Surface approx. 1.28 m²
  • Thickness 18 mm
The Desktop 160 × 80 cm tabletop up closeThe tabletop size next to a monitor and accessories, the ABS-banded edge, the black surface.
Black Desktop tabletop 160 × 80 cm – top view

Fits LVN System frames

The 160 × 80 cm size falls within the recommended desktop range of the Control Flex+ (100–160 × 60–80 cm) and Control Pro (110–200 × 60–80 cm) frames. With a tabletop this large, the Control Pro gives you more headroom: 2 motors and a 100 kg load capacity.

  • Control Flex+: frame 90–135 cm, load capacity 70 kg
  • Control Pro: frame 100–170 cm, load capacity 100 kg
Black finish of the Desktop tabletop – close-up

Screw it on without drilling holes

The tabletop has no factory-drilled holes. Lay it upside down, position the frame where you want it and screw it on with a drill driver using the screws from the frame kit. You decide the leg spacing.

  • Control Flex+: 10 M5 × 15 screws
  • Control Pro: 12 ST4.2 × 16 screws
  • Drill driver needed
Corner of the black Desktop tabletop – 18 mm board with edge banding

Black laminate with ABS edge banding

The 18 mm laminated board is easy to clean, and the edges are finished with 2 mm ABS edge banding. Every tabletop in the Desktop series is made in Poland.

  • Laminated board, black
  • 2 mm ABS edge banding
  • Made in Poland

Assembly

How installation works

  • 2 people to turn the desk over (per the Control Pro frame manual)
  • Tools: drill driver; screws and anti-vibration pads come with the frame kit
  1. Prepare the spaceCover the floor with a blanket or other soft material and lay the tabletop upside down.
  2. Position the frameExtend the frame to the width of the tabletop, place it on the tabletop and choose the leg spacing.
  3. Screw on the desktopFit the anti-vibration pads from the frame kit and screw on the frame with a drill driver: Control Flex+ with M5 × 15 screws, Control Pro with ST4.2 × 16.
  4. Controller and cablesScrew the controller to the underside of the tabletop and route the cables through the clips from the frame kit. Turn the desk over with two people.
The tabletop has no pre-drilled holes, so first position the frame and check the leg spacing, and only then drive in the screws.

Safety: Connect the frame power only after assembly is complete.

Attaching the tabletop to the framePositioning the frame on the upturned tabletop, choosing the leg spacing and screwing it on with a drill driver.

Desktop 160 × 80 cm Black tabletop specifications

Dimensions
Width160 cm
Depth80 cm
Thickness18 mm
Shaperectangular
Material and finish
Materiallaminated board
Edge banding2 mm ABS
Colorblack
Mounting holesno factory-drilled holes
Use
Recommended framesControl Flex+ (desktops 100–160 × 60–80 cm), Control Pro (110–200 × 60–80 cm)
Assemblywith a drill driver, using the screws from the frame kit
General
Weight with packaging15 kg
Country of manufacturePoland
Warranty36 months
Manufacturer code / EANLV2234 / 5902693722342

Questions about this product

What size is the Desktop 160x80 tabletop?
The Desktop 160x80 tabletop is 160 cm wide, 80 cm deep and 18 mm thick. It's a black laminated board with 2 mm ABS edge banding.
Does the Desktop 160 × 80 cm tabletop fit the Control Flex+ frame?
Yes. The Control Flex+ is designed for desktops from 100 × 60 to 160 × 80 cm, so the Desktop 160 × 80 cm tabletop falls within the range (at its upper limit). It also fits the Control Pro (110–200 × 60–80 cm).
Does the Desktop 160 × 80 cm tabletop have mounting holes?
No. The Desktop 160 × 80 cm tabletop has no factory-drilled holes — you screw the frame on with a drill driver wherever you choose, using the screws from the frame kit.
What is the Desktop 160 × 80 cm tabletop made of?
The Desktop 160 × 80 cm tabletop is an 18 mm laminated board with 2 mm ABS edge banding, in black. It is made in Poland.
How much does the Desktop 160 × 80 cm tabletop weigh?
The Desktop 160 × 80 cm tabletop weighs 15 kg with packaging.
At what height will the Desktop 160 × 80 cm tabletop be on the frame?
The tabletop is 18 mm thick, so add about 2 cm to the frame height: on the Control Flex+ (72–118 cm) the work surface is at about 74–120 cm, on the Control Pro (72–120 cm) at about 74–122 cm.

Rekomendowane dla Ciebie

    Najczęściej wybierane

    Sprawdzone rozwiązania, które realnie poprawiają komfort pracy